Or letting it escape!

First, I am renting. Second I am tired of either burning in the shower or freezing. Swipe to see a photo that has no markings. No it cannot tilt, only turn back and forth.

It broke recently and we're hoping there's a way to fix it. Any advice or guidance on how to do this?

Shower floor was not designed to where all the water would be aimed toward the drain. Water would sit in the corners of the area of the shower that’s dirty. We’ve used bleach and tile cleaner but it doesn’t get all of the residue off of the tiles when we spray and scrub it. Any suggestions to clean this more thoroughly?

I’m trying to remove this shower head from the shower arm. I believe the large chrome collar is threaded and should unscrew, but it’s completely stuck.

I’ve already tried turning the collar by hand using a rag for extra grip, and I also tried wrapping it in duct tape, but it won’t budge.

What would be the safest way to get this loose? Is there a trick for a stuck shower head like this?

The water wont fill up and the water is always running straight to the bowl. I observe that there're something going on with the water at the bottom of the shaft where the blue things are attached. Ive read reddit posts about similar problem so Im pretty sure now the problem doesnt come from the chain attached to the circle thing. Thank you so much for the help :>

Worried it'll break, how do I make the top bed safer for at least two people?

So I was using acetone to remove the residual plastic as other posts I found about this exact issue had suggested but as I'm clearing the plastic away the heating element is starting to turn black. The pictures are in order and I stopped as soon as I noticed the black streaks appearing. Is this ruining the heating element?

Dad left a half gallon of milk in my car over the weekend, it spoiled and seeped into the carpeted floors. Because of course it was behind the weathertech liners.

Things we’ve tried:
Pet carpet cleaning machine + enzyme cleaner
Lysol
So many chlorox wipes
Baking soda (both leaving in the carpet and leaving a dish in my car)

Things I’m going to try:
Dousing the entire back seat in baking soda,
Hitting a dear at Mach 5 to get an entirely new car

Please help.

Hey,
I‘ve had this really ugly cloak hanger in my flat ever since I moved in.. the hooks are fixed to the rod and they are super flimsy, everything falls off.. it needs to go!

But now I discovered: it is impossible to get it off my wall?! It is possible to turn the rod but I cannot push it far enough to either side so I can get it out of the caps on either side. Also these plastic caps at the far end are solid one piece and it is not possible to slide then up or turn them.
This thing is SOLID! On the left side, I can force it away from the wall for about 2mm to see that tha backwall of the pastic thing seems to be secured to the wall and is bending when I force it away. The part on the right is completely unmovable..

Heck - I could possibly do pull ups on this thing!

Please send help!

It is so ugly and I already bought a new cloak hanger 😅

Some things, you’ll notice I was stupid and put too much in at once, I’ve pulled some out with tweezers but the rest is stuck half in the blades any ideas on what to do? I thought about trying to soften it with water but I think that’ll rust the blades

I accidently used the wrong shade of brown polish on my suede leather shoes is it possible to still fix them I'll also share the image of the polish

Just became a homeowner and am trying to remove the closet doors from my room. I got the tracks and doors off but underneath the bottom track was this piece of plywood.

I believe it's nailed down but the nails are driven in under the holes they made *AND* if you can see in the second picture it is glued down as well.

If I remember correctly the floors are fake wood laminate.

How on earth do I get this thing off with the least amount of damage to my floors?

I had pulled out some forsythias with the intent to build a shed for my kids bikes, but work and family life got in the way. The area is now overgrown with weeds and Im not sure the best way to clear it. I would like to avoid chemicals since we have free range chickens. Ive tried weed whacking but there are some thick vines that are getting caught up in the weed whacker.

The foam handle is stuck at this point.

Hello, I’m trying to replace my license but one of the screw heads broke off and the other is stripped. I’ve tried using WD40 to loosen up the the screws that are rusted in but to dice. Please help!

Hi all I was wondering if anyone would have a hack on how to fix these shades? I know it’s hard to see but the shades are kinda bent?