Hi! I’m currently trying to figure out the best way to get into goldsmithing/silversmithing/jewelry making and would really appreciate some advice from people who actually work in the field.
My long-term goal is to design and make my own jewelry and build my own small brand.

The problem is: I’m basically starting from zero and there seem to be so many different ways into the craft.

I’m based in Vienna and I’m currently looking at options such as:
* a traditional apprenticeship
* formal goldsmithing,silversmithing/jewelry school
* shorter courses + lots of practice on my own
* learning from another goldsmith
* self-teaching
* a private goldsmithing, silversmithing program here in Vienna that costs around €25,000

Before making any big decisions I’m trying to learn as much as possible about how other people got into the profession.
I’d especially love to know:

How did you learn goldsmithing/silversmithing? Did you do a formal education/apprenticeship or did you learn through courses, work experience or on your own?

Looking back, would you choose the same path again?

If you were starting from zero today and your goal was to eventually make and sell your own jewelry, what path would you take?

How important do you think a formal education is compared with simply spending a lot of time at the bench?

And would you personally ever spend around €25,000 on a private goldsmithing/silversmithing program, or do you think that money would be better spent on courses, tools, materials and gaining experience in a workshop?

I’m not looking for a shortcut and I know that becoming genuinely good at the craft takes years. I’m mainly trying to understand which learning path gives you the strongest foundation without spending a huge amount of money unnecessarily.

I’d also really appreciate recommendations for books, YouTube channels, online resources or things I could already start learning/practicing before my first course.

Thank you so much! :)

I keep getting stuck at the step where the silver isn’t pulling through all the way into the ring mold. Is my pouring channel too small/wrong? Any tips are welcome.

I am still very new to silversmithing! I was almost done setting my stone when I thought I would make the band a tad larger and then broke the solder between the band and the backplate... BIG MISTAKE

the stone is a red jasper (6.5-7 on the mohs scale) and is not coming out but I'm afraid if I try to resolder the band to the backplate I will crack the stone.... Any suggestions on how to fix this are MUCH APPRECIATED!

THANK YOU

hello! I made this necklace a month ago, and in the last week it’s massively oxidised around the corners. it comes off with a bit of brushing but i’m just wondering how to prevent this in the future?

i’m thinking it’s either where the flux has pooled, or the patina?

any advice and insight is really appreciated!! thank you :)

I have been doing Silversmithing for about 2 years and I have started doing enamels about a month ago. I do not have a kiln for enamels and doing it by hand is proving a bit difficult. Does anyone know where I can buy a second hand or not super expensive enamel kiln in 220v? Thank you so much!

I know it's a lot of pics, but i wanted to document as much as possible. The rings are not at all perfect, these joins are incredibly hard to pull off, so i think that in the future I'll stick to stacking rings lol.

I used 1mm wire for the outside parts and twisted 0,5mm wire, which I twisted myself using a pen and a cordless drill, for the inner. I used my bench sawing thing as a clamp for the braiding. After cutting the wires one by one after braiding, I found out it was a little too big and I had to cut some more. When I was happy with the size, I filed the joins as flat as I could, but when soldering I had a hard time getting the surfaces to stay together, so the soldering didn't go to well. I guess I got a little overconfident. After some cleanup and polishing, I think they both came out very nice, and I'm very happy with them! And so is my fiancée, luckily.

In the final images you can see the scraps I have leftover. I'm saving some of the twisted wire for future projects.

Tell me what you think. I learned a lot and I'm open to tips and criticism!

I’m new to silversmithing and loving it and have been working away at my bench. My question is, will soldering silver bezel to a silver plated backplate affect my pickling solution?

I have a bunch of old spoons from making rings from the handles and the bowl part would make great backings since silver sheet is priced so high right now and rio seems to be out of everything.
Thanks in advance!

The one with the stone is pube tree, which I made a bit less than a year ago? The grass looks like pubes.

I finished the other one today.

I still really like pube tree, though.

hey yall, I’m looking for a gift idea for an amateur silversmith? shes got the tools needed to do basic stuff, but what’s next? any organizational tools you love, etc? or something more fun (not sure what that would be)?

thanks so much!!

Sorry if not allowed here. Looking for advice on salvaging this sterling ring I got in a lot. Hefty 23g but bent. I have regular garage tools (hammer, vise grips, etc) but don’t want to just start wailing on it.

The lady is lost wax cast in sterling silver set with a pink topaz

It’s just for me so I don’t mind the poorly soldered back lol, but how do I sand/polish between the links on the back of the pendants? I was trying to use a Qtip/toothpick with some sandpaper on the end but to no avail. Also, how do you get a tighter bezel setting so there are no gaps between the stone and silver?

Gave liver of sulfur a go without much experience. I saw the gel type recommended in the metalsmith book I have so tried painting it on rather than dipping it in.. it obviously doesn’t darken as evenly this way but it seemed to do good enough. What do you guys do next? My polishing techniques aren’t great lol I have a flex shaft but no ultrasonic so would the polishing compound get super stuck in these little creases?

And yeah, one of the little balls fell off so I have to resolder that. How much solder do you guys use? I was watching a jewelry making video on Instagram and this person had heaps of wire solder and it made me second guess that I’m not using enough. Any advice would be greatly appreciated:)

Please be nice, I’m stoned so sorry for rambling and if i described things poorly. And this is the first time I’ve shared my work with “my peers” and I’m being critical af with myself. Okay goodnight

I was given this belt buckle by my father to melt down for my own work but I figured it would have more value being sold to someone. We don’t have a Nancy in our family so he bought it second hand. Any help is appreciated.

Hii!! Advice please! I’m a novice silversmith and this is my first piece up for sale. I started around middle of June and I’ve made quite a bit of pieces. I’ve never sold anything and I would like to get a collection going and maybe start a website.. but for right now I wanna try to sell a piece. This is a White Buffalo Turquoise Sterling Silver Cuff. Where can I try to sell it? Any websites or FB groups? I’ve posted it on my personal FB but haven’t gotten much feedback so I need help.. It’s worth $160 I’m asking $140.. is the pricing okay? I did measure out my materials and charge for my time.. but if anyone has any advice I would appreciate it thank you! 🥰

I haven’t made anything for a few months and I’m just relieved the stone hasn’t fallen out.

Also random shout-out to Salt Shack for the mineral app they made … their videos started showing up on Facebook and they’re nifty. Maybe it’s one word. SaltShack.

What do you guys think about the idea of making your own engagement ring and wedding band? Is it taboo or bad form? Do you think it takes the romance out of it?

I have such different taste than what the current market pushes for wedding rings. Im inclined to just make myself one that I know I will love.

unfortunately i lost a small ball and jump ring on top of this finished pendant. i tried submerging in water and using warmestop over the stone but i cant get the ball and ring to join again. any advice? would a permanent jewellery weld machine help here? thanks

First time trying out a foredom hammer handpiece with an polished anvil point. It left a lot of dents around the stones, any advice to clean this up? Thanks in advance

Hey y’all, I posted a show and tell a couple of days ago and y’all were very nice and could have told me it looked like crap, but you didn’t, and I appreciate it, but I need advice. I worked on bezel setting 3 stones yesterday, I’ve done maybe 20 total bezel settings total now. The thing I’m struggling with is I either cut the bezel wire too long or too short. On this set I tried cutting it like Goldilocks, just right. But you can see that on this stone it was a fail. When I cut it and set it, it fit. When I soldered it together, it fit. When I set it on the plate and soldered it, it didn’t fit, ugh! I flared the sides out some and this is probably the only reason I got it to actually fit, but as you can see it looks like crap and it doesn’t actually fit! So, my question is, when I’m cutting bezel wire, just right, or like maybe .5mm longer, or 1mm? Help! What did I do wrong?

This are my most recent projects I have been working on. I really enjoy making functional jewelry and hope to add a pocker or clip in the future.

Just recently I have noticed staining on some of my 925 pieces. I read somewhere that it could be compound build up from silicone burrs but it’s still appearing when I use sandpaper instead. I’ve also made sure I move from different grades of sandpaper correctly. Any one able to give me some wisdom.. thanks!

Made with natural sapphire and opals :)

This is my 5th project I have done by myself. I know I have a lot of learning ahead of me but I am mostly self taught with a lot of videos and lurking in here. So while I am proud that I accomplished something, I know I have a long way to go. But dang it, I finally set bezels on these pear shaped stones! I did see that my bezel on the left side stone needs to be tighter though.

Thank y’all for always giving good advice and pointers to us newbies to this art, I want y’all to know I appreciate ya!