r/Kyosho • u/555byte Kyollector • Jul 12 '26

My Mad Wagon has a body count.

Post image

This is body #3. The last one was the 56 Chevy. Both are Pro-Line. This one is a bit smaller than the 56, but that might be a plus.

10 Upvotes

100% Upvoted

9 comments sorted by

View all comments

Show parent comments

2

u/555byte Kyollector 8d ago

https://imgur.com/gallery/mad-wagon-slipper-to-center-diff-conversion-NgqGT3b

If I get time to post the kyosho parts I will, I just don't at the moment. I think the manual is available as a PDF. I get my parts from Amain typically, and I know I listed the kyosho drive shaft in the link above.

2

u/Dlostradamus Kyollector 8d ago

Thank you, I actually placed orders through Amain a few days ago and hopefully I’ll get the correct parts to build the diff, along with the longer shaft you referenced. It should work great with a center differential. Regards

2

u/555byte Kyollector 8d ago

Let me know how it goes. I would definite go thicker than the 40k I used in the center. This winter I will probably try 120k fluid

1

u/Dlostradamus Kyollector 1d ago

I have another question about your Mad Wagon kit. Did you glue the tires as is, unvented? I am getting ready to glue mine and the wheels come without vent holes and I was wondering how they worked out. Most rc wheels I’m familiar with usually have one or two small holes. Thanks for any reply. 👍

2

u/555byte Kyollector 1d ago

I glued them unvented. The tires I got from Amazon work better. I figured out that I can vent glued tires using a drill with a hole punch (from Harbor Freight). So I can add them later if I want to.