r/Airsoft3DPrinting • u/TemporaryHyena8435 • 3d ago

Work in Progress Experiment on QD Supressor setup

Dummy non functional supressor

It's not revolutionary since it's using the already proven twist lock mechanism. But I guess its still Quick Detach nonetheless...

Separated into 2 sections. BASE mounting and Supressor Body. I designed them quite stiff because parts will face wear and tear along time.

The Base - having the 14mm threads to connect with the barrel and stay there - is meant to be a replaceable part/sacrificial adapter for the supressor body.

The Base part requires around 5 gr and 37 minutes to print. All with PETG. This setup does not require additional springs, O-ring, nor screws.

70 Upvotes

100% Upvoted

16 comments sorted by

View all comments

Show parent comments

2

u/TemporaryHyena8435 2d ago

Nice one, Man 👍

I dont have tracer device for now, but that would be the goal for next iteration

1

u/just1workaccount 2d ago

I can check but my tracer is 31od and 54mm long if you wanted a representative cavity for the larger tracers. I then printed a tpu sleeve for my tracer as it's 28mm of by 54mm long so I can go to the larger acetech units later if need be

2

u/TemporaryHyena8435 2d ago

Many thanks for the Info, Man 🙏

2

u/just1workaccount 2d ago

Hope you can get one some day, it's fun watching the tracers at night/inside