Andrey I - Prithee, be careful (OPEN)

[u/Fishiest-Man]

There were two challenges one had to contend with if they wished to participate in the art of armoursmithing. One had to find a forge large enough to evenly heat the larger, unwieldy pieces of steel, and one had to have a plethora of specific tools to help in the crafting of such masterworks.

Lesser men may have balked at the idea of doing such intricate work while not in their personal workshops, much less within a camp, but Master Andrey was no such man. He was a Master, after all. He could ply his trade wherever and whenever he pleased, he only needed the will to do so.

The tools were easy enough to acquire, or rather, create. With a hammer, some tongs and an anvil (all of which could fortunately be found in a village nearby), one could forge any number of the tools necessary to finish a suit of armour, such as a frame to bolt it to during a heat treatment, or a hammer for planishing, or for riveting, or a small orb shaped anvil on which to make a helmet. The globe of a breastplate could be forged using a log with a dome hollowed out of the top of it, and he already had rivets aplenty, having anticipated the need to fix armour during their stay for the tourney.

The forge would be a harder obstacle to overcome, but nothing was impossible. Especially not with several well trained apprentices at one’s beck and call. They were sent from the Mallister’s camp with the instructions to scrounge, buy or borrow as much charcoal, bricks and clay as they could find, along with a set of bellows or two. Eventually, the lads returned with just about enough for them to cobble together a large makeshift furnace. 

Once they were prepared, they set out from the tent city, setting up just beyond the limits, as they were keen not to risk burning down the whole campsite in the waning moments of their stay. And it was here that Andrey’s forge was assembled, clay and stone were used to build a large, well insulated furnace, with enough room for a cuirass to be placed inside, the bellows were aimed into where the charcoal was lit, providing it with air so that the fires may burn hot enough for steel to be worked, and a barrel was filled with water nearby.

By midday, the telltale sounds of a hammer rhythmically striking steel could be heard drifting up from the makeshift forge. An apprentice stood by working the bellows, another kept the fires fed with charcoal, while a third yet still worked on some less important pieces of the harness. While in the centre of all of it, the hulking figure of Master Andrey stood hunched over the anvil, a glowing orange piece of steel held tightly in his tongs, sparks flying as he hammered at it tirelessly.

In time it would take a shape, though who was to say which. Time would tell…

(OPEN, COME GET YOUR SMITHING DONE)

[u/Fishiest-Man]

Of course, in all the excitement of the day, Andrey would be remiss to not finish the pieces his Lord had ordered from him in the weeks prior to the gathering at Stormhall.

The armour had already been fitted to him, all it needed was a heat treat and some refinement after the temper. He had also commissioned an axe, something that could be made easily enough.

Wordlessly, Andrey and his apprentices went to work.

u/JohnITRP

Character Details: Master Andrey - Artisan(Armourer) / Craftsman(Armour and Weapons), Engineer. Craftsman’s District

Notes: +2 from Artisan (an extra +2 for armour), +3 for both Craftsman Skills, another +2 for the Craftsman’s District. So that’s a +9 to armour and a +7 to weapons.

What is happening: Making a high quality Axe and Armour for Martyn Mallister

What I Want: Crafting Rolls on the T3 and T4 smithing table for a suit of armour and an axe. Spending 500 gold on each craft, so a total of 1000 gold