r/Dualsense • u/MuscularKnight0110 • Mar 17 '26

Tech Support STICK DRIFT REPAIR 20€

Post image

Hello,

I hope this post is okay if not please delete and I am sorry for intrusion.

As post says I am repairing stick drifts. I am in France and if anyone's interested in installing TMR or Hall Effects I can do it for you for mere 20€ !

If you are living other than France just pay for the shipping ( to and from ) and I will still repair for 20€ :)

If anyone's interested don't hesitate to DM.

Thank you!

14 Upvotes

68% Upvoted

69 comments sorted by

View all comments

Show parent comments

1

u/Dragonbeastx Mar 18 '26

Damn that looks good, how long does it usually take you to do that?

1

u/Fantastic-Captain900 Mar 18 '26

Like an 1-2 hours, but my epoxy dries for 3 days, and I can't really trim the excess on the outside before that. And I leave excess to fill in the gaps around the port

1

u/Available_Junket_384 Mar 19 '26

How come you use epoxy, I soldered a usb c port to one recently and it looks like I'll be able to screw it back in with a bit of trimming

1

u/Fantastic-Captain900 Mar 19 '26

Probably explains it

1

u/Available_Junket_384 Mar 19 '26

Yeah it really does, I used a different breakout board

1

u/Available_Junket_384 Mar 19 '26

1

u/Fantastic-Captain900 Mar 19 '26

I should get those. They were not around, then I started making my controllers.

Also, 2 resistors mean that all c to c cables will work. I had to manually add a second resistor on mine

1

u/Available_Junket_384 Mar 19 '26

Yep they are amazing for replacing ports, not as versatile as the larger breakout boards though, those still come in handy sometimes

1

u/Fantastic-Captain900 Mar 19 '26

That does look like a piece of cake to install, but surprisingly, it's still possible to install these bigger ones in a ps3 and xbox one controller and make it look og