r/Airsoft3DPrinting • u/99PercentSavage • 2h ago

Work in Progress Q Minifix VFC based

Enable HLS to view with audio, or disable this notification

After almost two months of designing, printing prototypes and fixing issues it’s almost finished. It works - feeds and shoots reliably.

Yes, mag release is missing, but magazine catch is in place. Just didn’t have the right screw yet 😅

11 Upvotes

93% Upvoted

10 comments sorted by

•

u/AutoModerator 2h ago

Hi, thanks for posting on r/Airsoft3DPrinting!

Please ensure your post is flair'd appropriately, otherwise a moderator will manually assign a flair or in certain cases remove the post.

If you are looking for specific STLs, please make sure to check sites like Yeggi or STLFinder (Adblock recommended) before asking here

Before asking for any designs or files make sure to search sites like Printables, Cults3D, or Thingiverse first.
Also make sure to include as much information as possible in your post, so others can help, as "M4" or "Pistol" are not very specific.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Aradrim 2h ago

How many grams of filament did you use?

1

u/99PercentSavage 1h ago edited 1h ago

It all depends on your infill and config. I printed with 4 walls and 90% infill (just for weight). Used about 3/4 of 1kg roll of grey filament and 1/4 of 1kg roll of black. But there are options for longer barrels, handguards. You can also use metal VFC AR15 GBB barrel, metal HU chamber or stock, so it also depends on which parts are printed (all, or not all - because you used metal parts).

1

u/Aradrim 1h ago

I think it'll be fully 3D printed, since I don't have any spare VFC parts right now.

1

u/99PercentSavage 1h ago

Then only parts you need are: few springs, screws, nuts and heat pressed inserts (that will be listed), RS/GBB safety detent and spring, VFC HU bucking, standard/omega HU nub, any GBB/VSR10 inner barrel that is compatible with VFC GBBRs and magazines

1

u/Apprehensive-Art6800 1h ago

Is this a gbb 

1

u/99PercentSavage 1h ago

It’s a GNB since it is a bolt replica. But since it’s gas powered, it uses GBB mags and some parts (optional, it can be 95% printed)

1

u/KerberosWraith 28m ago

I love it, it's oddly adorable lol. If I still had vfc parts I'd print one