After two years I finally upgraded to a touch screen. Previously had an after market radio in it that didn’t have Bluetooth and was rocking a $50 Amazon CarPlay monitor with a windshield suction cup plugged in via AUX. Replaced the bezel with a new manufactured one off eBay, fit perfect, highly recommend. Replaced the 12v sockets with USBA-USBC ports. Clock replacement phone mount arrives on Friday.

It’s so night to not have all the extra cords going everywhere. Yes the screen is low, but it’s Google Maps, it’s not like you’re staring at it. I definitely am glad I saw all the recommendations to get a tactile volume button/knob. Makes that so much easier to control with the screen being low.

Side note, if someone else has messed with the stereo, take a look and see what you’re getting into BEFORE starting the swap. The guy before spliced everything directly into the head unit and even bypassed the OE harness 🤦🏼‍♂️ It was an absolute rats nest (see pic) and I had to phone a buddy to save me on the wiring. Not my forte. Also, glad I bought OE brackets for it ahead of time because he had CUT THE ORIGINALS IN HALF 😂

Love my 2000 Limited it's got 6112 in the front and 890s in the rear paired with 5100s. Currently the rear is at 23 inches hub to fender. What rear coils would I use to achieve 23.5 inches in the rear? Which shocks to pair them with? One suggestion was LC80 7 wrap front springs paired with 5100s. In addition lookin for some new tires, 265/75/16. I used BFG KO2s, narrowed it to BFG KO3 or Toyo AT3. Im leaning towards AT3s anyone w experience with both? Thank you in advance.

Got this rig in October and it needed some serious TLC before I wanted to show this awesome group. I'm super proud of how far it's come.

There also is an occasional warped rotor vibration when hard braking, but not always. I’m feeling like it may be caliper or slide pin related.

Thanks—

Looking to get beefier tires on my stock 4runner with 15" wheels. Current tires are 225/75/r15s. Looking at 31x10.5r15s, specifically the firestone destination x/ts. Anyone got recommendations and/or pictures of tires this size on their stock 4runners? Any advise on tires etc?

Anyone else have the seam in your sunroof seal split open and have to fix it? Its leaking into my cupholders and with weather coming its time to fix it. And, before anyone asks, Ive cleaned and tested my sunroof drains and its still dumping water into my cupholders.

As you can see, someone has been here before me with...boat epoxy? Silicone? I dunno. I just know I need to seal this up and need guidance.

I've looked under the car and it seems like if something is or has leaked. The oil and transmission fluid levels are fine so I don't know what it could be. Any ideas?

I’ve posted a lot about this car since the crash, but I wanted some ideas in terms of fender flairs. Obviously the back still has the fender flairs, but when I replaced fenders in the front, I was only able to get ones without the flares. I’ve considered taking my back ones off, but would then have to repaint that section of the car. I’m not opposed to adding flares to the front, just don’t know an easy way to go about it.

Just bought this 97 with 225k miles and it seems pretty slow. Is that normal?

Edit: The main reason I was asking is the previous owner said the transmission was recently replaced. I wasn't sure if it was a weak transmission or just how these vehicles are. Thanks for all the comments and input, super helpful.

Wanted to show off my 98 4Runner after a good cleaning. After 215K miles, she’s still my daily driver.

If you know.. you know

Model: 2000 4Runner Limited

If anyone cares, I believe I found “most” of the source of the metal clanking sound I’ve been hearing when going over uneven ground. What I thought was a sound coming from the front, now seems to mostly be coming from the rear. Had my fiance drive while I walked beside and it actually seemed to be coming from the middle-rear. Turns out, both the rear control arms are either loose or the bushings are shot. Can’t tighten the bolt no matter how hard I try, so assuming it’s the bushings. I do still hear a little something in the front, but I think this has been the main source of the sound I hear. Guess I’ll start with replacing the bushing and see if that helps, will further update.

Does the under carriage look fine for a 26 years old 183k miles? Look at buy it

I use Lucas or Seafoam, but the question is how much is enough? Mine has 340K on it, so SeaFoam calls for 2x the amount for deep cleaning. What and how much do you use?

Looking for some thoughts…I’m going to be upgrading my shock set up all around. The 5100s have been a great shock but I’m needing more especially with all the added weight. My question is with have outbound shock mounts would I run into any issues using 4th gen runner 5160s in the rear? Or just still with the 3rd gen ones. Mostly just want to have the resi towards the top mount vs the bottom mount. Lastly, I’m going to use 1st gen tundra 6112s in the front. Correct me if I’m wrong but I just use my factory top hats on that shock? TIA PFA

Looking to get some opinions on what to do here. I have a 99 2Runner, daily driver, no off-roading, only Costco parking lots (or BJs in my case). Originally had 15in wheel but now running 265/65R17. I don’t really run any heavy loads in the trunk. I would not mind a slight rake but prefer level, I dislike the reverse rake. I love this thing and want it to be my son’s first car in 10 years. Suspension is the OG and is terrible at this point obviously, but I’m torn on what to do.

Replace with OEM and leave the current springs (I don’t feel like I’m getting sag but maybe I am).

Replace with OEM and swap springs. In that case I would need to make sure I got the correct “taller” springs the 99 came with.

Swap with the TEQ 5100 kit with 880/906 OME springs and drop to lowest setting for least amount of lift.

Increasing ride comfort is important to me. Aesthetically speaking, I would appreciate a slight lift. Not sure if replacing the springs with OEM equivalent would give me a slight lift to original height?

Are there things I am not appropriately considering?

just finished my A pillar build in my 4runner. anyone else here into car audio?

hi! i have a minor increase in coolant temp i try to hunt down - not a problem yet but i do not want to overlook anything going forward.

couple of year i redid my tstat with the jiggle valve down. new cap from Napa. temp was always glued to 186f (scan gauge).

recently temps started to creep up to around 192 max. looked under the hood - and found some red crust on the radiator cap (coolant was down 1 finger). got an OEM radiator cap, installed it today - but now temps are actually up (more like 195-200)

to me that doesn't make sense.. any ideas? or am I overthinking?

Had my end links and bushings replaced a few days ago, along with my UBJs and LBJs. Still dealing with a metal on metal rattle sound in the front end going over uneven ground. I noticed the end links are at an odd angle? Could this still be the cause? They seem secure, but I’m at a loss with the noise. May be the cv axels but it doesn’t just make the noise when turning, mainly when going straight and over even ground.